I wonder if it’s feasible? Never really bothered with 80% lowers, but it’d kind of be interesting to see if I could do it. Anyone have any experience?
posted by by Robb Allen @ 5/8/2017 9:18:15 PM | Feedback (6)
You can build it! This past weekend, I spent a few hours running a test to see if I could model something like this Into this And I did! That’s a rough prototype. I only used a 1/16” flat down-cut bit which leaves a pretty rough surface. I had to hit it on the sander just to get rid of a lot of the wood shavings, but other than that this is what pops out of the machine in a single pass. Took about 40 minutes to rout, but the information gleaned was invaluable. First thing I learned is how...
posted by by Robb Allen @ 3/28/2017 8:39:29 AM | Feedback (23)

| Back to Categories